UPDATING WITH USB
Samsung may offer updates for the Soundbar's system firmware in the future.
If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it
to the USB port on your Soundbar.
Note that if there are multiple update files, you must load them onto the USB device singly and use them to update the
firmware one file at a time.
Please visit samsung.com or contact the Samsung call center to receive more information about downloading update
files.
+ Updating Procedure
1. Connect a USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a standard
female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.
● The USB adapter cable is sold separately. To purchase, contact a Samsung Service Center or Samsung
Customer Care.
2. While the Soundbar is turned off, connect the USB storage device that contains the updating firmware to the
female end of the USB adaptor cable..
3. Turn on the Soundbar. UPDATE appears on the display and updating begins within 3 minutes.
• When the update is complete, the Soundbar turns off and on automatically.
USB Adaptor Cable
(not supplied)
To Next Page
Loading...
