Samsung HW-MS6500 - Page 14

3.
Press
the
Left
button
on
the remote control for 5
seconds
to turn Auto
Power
Link
on
or off.
•
Au
to
Power Link
is
se
t to
ON
by default.
(To
turn off this functi
on,
turn
off
Auto
Power
using
the
Sound
bar.)
•
Depending
on
the connected
device,
Au
to
Power
Link
may
not function.
•
This
function
is
only available
in
the
"
D.IN"
mode.
Connecting
a
TV
using
an
HDMI
Cable
Bottom
of
the
Sound
bar
Connect
to the
HDMIIN
(ARC)
port
of
your
TV.
HDMICable
(not
supplied)
Connecttothe
HDMI
OUT(TV-ARC)
port of the
Soundbar
main
unit.
~
TV
ARC
Right
Side
of
the
Sound
bar
1.
With the
Sound
bar
and
TV
turned
on,
connect the
HDMI
cable (not supplied)
as
shown
in
the figure.
2.
"
TV
ARC"
appears
in
the display window of the
Sound
bar
main
unit
and
the
Sound
bar
plays
TV
sound.
• If
TV
sound
is
inaudible,
press
the
~
(Source)
button
on
the remote control or
on
the right
side
of the
Sound
bar
to switch to
"
D.IN
"
mode.
The
screen
displays
"
D.IN
"
and
"
TV
ARC"
in
sequence,
and
TV
sound
is
played.
• If
"
TV
ARC"
does
not appear
in
the display window of the
Sound
bar
main
unit, confirm that the
cable
is
connected to the correct port.
•
Use
the volume buttons
on
the
TV's
remote control to
change
the volume of the
Sound
bar.
ENG-8