Samsung HW-MS6500 - Wireless Connection Methods

Method 2. Connecting Wirelessly
Connecting a TV via Bluetooth
When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling .
•
Only one TV can be connected at a time.
The initial connection
1. Press the~ (Source) button on the right side panel or on the remote control, and then select
"BT".
2. Change "BT" to "BT PAIRING".
• If "BT READY" appears, press and hold the~ (Source) button on the right side panel of the
Sound bar or on the remote control for more than 5 seconds to display " BT PAIRING".
3. Select Bluetooth mode on the TV. (For more information, see the TV's manual .)
4. Select "[AV] Samsung Sound bar MSxxxx" from the list on TV's screen.
An available Sound bar is indicated with "Need Pairing" or "Paired" on the TV Bluetooth device list.
To connect to the Sound bar, select the message and establish a connection.
•
When the TV is connected, [TV Name] -7 "BT" appears on the Sound bar's front display.
5. You can now hear TV sound from the Sound bar .
If the device fails to connect
• If the previously connected Sound bar listing (e.g. "[AV] Samsung Sound bar MSxxxx") appears in
the list, delete it.
•
In "BT" mode, press and hold the~ (Source) button for more than 5 seconds on the right side
panel of the Sound bar or on the remote control to switch to "BT PAIRING" mode.
Then, select "[AV] Samsung Sound bar MSxxxx" from the TV 's search list.
What are the BT READY and BT PAIRING statuses?
• BT READY : In this mode, you can search for previously connected TVs or connect to the Sound bar
from a previously connected mobile device.
• BT PAIRING: In this mode, you can connect to a new device. (While in "BT" mode, press and hold the
~(Source) button for more than 5 seconds on the right side of the Sound bar or on the remote
control.)
ENG-9