Samsung HW-MS6500 - Page 16

NOTES
• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Sound bar and the Bluetooth device exceeds 32.8 ft.
•
The Sound bar automatically turns off after 5 minutes in the Ready state.
•
The Sound bar may not perform Bluetooth search or connection correctly under the following
circumstances:
- If there
is a strong electrical field around the Sound bar.
- If several Bluetooth devices are simultaneously paired with the Sound bar.
- If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic
devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Sound bar main unit- e.g., microwaves, wireless LAN devices, etc.
Disconnecting the Soundbarfrom the TV
Press the~ (Source) button on the right side panel or on the remote control and switch to any mode
but " BT" .
• Disconnecting takes time because the TV must receive a response from the Sound bar.
(The time required may differ, depending on the TV model.)
Connecting via Wi-Fi
Pre-connection Checklist
1. Confirm that your Samsung smart TV was released after 2014. This function is compatible only
with
Samsung smart TVs released after 2014.
2. Make sure your Wireless router (Wi-Fi) is ready and working.
3. Make sure that the TV is connected to the Wireless router (your Wi-Fi network).
ENG -10