Samsung HW-NW700 - 05 CONNECTING AN EXTERNAL DEVICE; Connecting using an Optical Cable

ENG - 16
06 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• You cannot connect more than one Bluetooth device at a time.
SOUND
MODE
PAIR
OR
Bottom of the Soundbar
Bluetooth device
The initial connection
1. Press the
VOL WOOFER
SOUND
MODE
PAIR
button on the remote control to enter the “BT PAIRING” mode.
(OR)
a. Press the button on the bottom panel and then select “BT”.
“BT” changes to “BT READY” in a few seconds automatically if there is no Bluetooth device
connected to the Soundbar.
b. When “BT READY” appears, press and hold the button on the bottom panel of the
Soundbar for more than 5 seconds to display “BT PAIRING”.
2. On your device, select “[AV] Samsung Soundbar NWxxx” from the list that appears.
• When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] → “BT”
appears in the front display.
3. Play music les from the device, connected via Bluetooth, through the Soundbar.
If the device fails to connect
• If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar NWxxx”) appears in the
list, delete it.
• Then repeat steps 1 and 2.
NOTE
– After you have connected the Soundbar to your mobile device the rst time, use the “BT READY”
mode to reconnect.