Samsung HW-NW700 - 02 PRODUCT OVERVIEW

ENG - 9
02 PRODUCT OVERVIEW
Front Panel / Bottom Panel of the Soundbar
Display
Power
Volume
󱂓
Bottom Panel
Position the product so that the SAMSUNG logo is located on the top.
Rear Panel of the Soundbar
DIGITAL AUDIO IN
(OPTICAL)
DC 23V
WIRELESS
ID SET
(WOOFER/REAR)
NETWORK
DIGITAL AUDIO IN
(OPTICAL)
DC 23V
WIRELESS
ID SET
(WOOFER/REAR)
NETWORK
󱂗 󱂘
󱂔
󱂕
󱂖
󱂓
Source
Selects the source input mode. (D.IN / WIFI / BT)
• To turn on “BT PAIRING” mode, change the source to “BT” mode, and then press and
hold the button on the bottom panel for more than 5 seconds.
󱂔
D.IN Connect to the digital (optical) output of an external device.
󱂕
WIRELESS
Attach the wireless dongle that connects the Soundbar to surround speakers and a
subwoofer wirelessly. (The surround speaker, subwoofer, and wireless dongle are sold
separately.)
󱂖
DC 23V Connect the AC/DC power adapter. (Power Supply In)
󱂗
NETWORK Press to connect to a wireless network (Wi-Fi) via the SmartThings app.
󱂘
ID SET
Press to connect the Soundbar to surround speakers and a subwoofer wirelessly.
• Press and hold the Up button on the remote for 5 seconds to complete ID SET.