098
Starting PC mode
Connecting the camera to a PC
Disconnecting the camera and PC
Refer to page 100 (Removing the removable disk).
If you connect the USB cable to a USB port on your PC and then
turn on the power, the camera will automatically switch to “computer
connection mode”. In this mode, you can download stored images to
your PC through the USB cable.
Camera settings for connection
1. Turn on the camera
2. Connect the camera and computer with the supplied USB cable.
3. Once the camera is turned on, the camera automatically recognizes the
PC and is connected to it.
Ú
If automatic connection fails, set the [USB] menu to [Computer]. (p.89)
To Next Page
Loading...
