EasyManua.ls Logo

Samsung HZ15W - Page 14

Samsung HZ15W
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
_______
C_o_n_n_ec_t_ing
to
the
HDTV
using
the
HDMI
cable
Anynet+(CEC)
is
an
AV
network
system
which
controls
all
your
connected
SAMSUNG
AV
devices
when
using
the
TV
remote
control
that
supports
Anynet+.
When
connected
to
the
SAMSUNG
HDTV,
you
can
operate
the
playback
functions
by
using
the
camera
or
the
TV
remote
control.
•
In
order
to
use
the
Anynet+(CEC)
feature,
the
Anynet+
option
under
the
camera's
[Settings]
menu
must
first
be
activated.
•
How
to
use
the
Anynet+(CEC)
1.
Connect
the
HDMI
cable
to
the
HDMI
port
of
both
the
camera
and
HDTV.
2.
TV
turns
on
as
soon
as
the
power
button
is
pressed
on
the
camera.
3.
If
there
is
no
picture
after
turning
on
the
TV,
press
the
source
button
on
the
TV
remote
control
to
change
to
the
HDMI
mode.
-
Depending
on
the
TV,
it
might
not
change
to
the
HDMI
mode
although
you
press
the
source
button.
4.
Set
the
TV
to
Anynet+(CEC)
mode.
Direct
conversion
into
Anynet+(CEC)
mode
may
be
possible,
depending
on
the
model
of
the
TV.
-
Refer
to
the
TV
manual
for
further
information
on
activating
the
Anynet+(CEC)
mode.
5.
Press
the
menu
button
on
the
remote
control
unit's
playback
control
pad
to
display
the
playback
menu
on
the
TV
screen.
x
The
playback
menu
appearing
on
TV
screen
operates
the
same
function
of
the
camera.
6.
Select
the
desired
playback
function
by
using
the
remote
control
of
the
TV
or
the
camera.
x
To
select
the
sub
menus,
move
to
the
desired
playback
menu
and
then
press
the
Enter
(OK)
button.
•
Only
available
when
using
the
TV
that
supports
Anynet+(CEC).
(Not
available
by
using
TV
that
supports
Anynet)
•
For
more
detailed
information
of
the
HDTV
connection,
see
the
user
manual
of
HDTV.
EN-13

Table of Contents

Related product manuals