Samsung J1484(V/S/C) - Overview of the Control Panel; Temperature Selection Button; Spin Selection Button

SAMSUNG Washing Machine Owner’s Instructions B-2
Overview of the control panel
 This is a general manual. The INLAY system may be different from that of the product you
purchased. For (
�
), see item 5 below to select the right specifications that match your product.
1. Digital graphic display
Displays the remaining wash cycle time,all of washing information and error messages.
2. Wash selection button
Press the button to select wash. Wash is available only with Daily Wash, Baby Cotton,
Heavy Soil, Bed Linen, Cotton, Coloureds, Synthetics, Delicates.
3. Temperature selection button
Press the button repeatedly to cycle through the available water temperature options
(cold water( ), 30 ˚C, 40 ˚C, 60 ˚C and 95 ˚C).
4. Rinse selection button
Press the rinse button to add rinse cycles. Maximum number of rinse cycles is five.
5. Spin selection button
Press the button repeatedly to cycle through the available spin speed options.
J1484/B1482
Rinse Hold,
, 400, 800, 1200, 1400 rpm
J1284/B1282
Rinse Hold,
, 400, 800, 1000, 1200 rpm
J1184/B1182
Rinse Hold,
, 400, 600, 800, 1000 rpm
: no spin
No spin
The laundry remains in the drum without being spun after the final drain
Rinse Hold
The laundry remains soaking in the final rinse water.
Before the laundry can be unloaded, either “Drain” or the “Spin” program must be run.
6. Delay Start selection button
Press the button repeatedly to cycle through the available delayed start options (from 3 hour to 24
hours in one hour increments).
Displayed hours means the time of finished washing-cycle.
Washing a Load of Laundry
A
J1484HAC-02418B_EN.indd 2 2006-09-20 ｿﾀﾀ・9:07:11