Connecting the water supply hose
The water supply hose must be connected to the washing machine at one end and to the water faucet
at the other. Do not stretch the water supply hose. If the hose is too short replace the hose with a longer,
high pressure hose.
To connect the water supply hose:
1. Take the L-shaped arm fitting for the cold water supply hose and connect to the cold water supply
intake on the back of the machine. Tighten by hand.
2. Connect the other end of the cold water supply hose to your sink’s cold water faucet and tighten
it by hand. If necessary, you can reposition the water supply hose at the washing machine end by
loosening the fitting,rotating the hose, and retightening the fitting.
Installing the Washing Machine
To Next Page
Loading...
