Samsung K4350 - Class ATE: Tests

Samsung Multifunction MultiXpress X4220, X4250, X4300, X401, K4250, K4300, K4350, K401 Series
76
Copyright

2014 SAMSUNG ELECTRONICS Co., Ltd., All rights reserved
ALC_FLR.2.3D The developer shall provide flaw remediation guidance addressed to
TOE users.
Content and presentation elements:
ALC_FLR.2.1C The flaw remediation procedures documentation shall describe the
procedures used to track all reported security flaws in each release of
the TOE.
ALC_FLR.2.2C The flaw remediation procedures shall require that a description of
the nature and effect of each security flaw be provided, as well as the
status of finding a correction to that flaw.
ALC_FLR.2.3C The flaw remediation procedures shall require that corrective actions
be identified for each of the security flaws.
ALC_FLR.2.4C The flaw remediation procedures documentation shall describe the
methods used to provide flaw information, corrections and guidance
on corrective actions to TOE users.
ALC_FLR.2.5C The flaw remediation procedures shall describe a means by which the
developer receives from TOE users reports and enquiries of
suspected security flaws in the TOE.
ALC_FLR.2.6C The procedures for processing reported security flaws shall ensure
that any reported flaws are remediated and the remediation
procedures issued to TOE users.
ALC_FLR.2.7C The procedures for processing reported security flaws shall provide
safeguards that any corrections to these security flaws do not
introduce any new flaws.
ALC_FLR.2.8C The flaw remediation guidance shall describe a means by which TOE
users report to the developer any suspected security flaws in the TOE.
Evaluator action elements:
ALC_FLR.2.1E The evaluator shall confirm that the information provided meets all
requirements for content and presentation of evidence.
6.2.5 Class ATE: Tests
6.2.5.1 ATE_COV.1 Evidence of coverage
Dependencies: ADV_FSP.2 Security-enforcing functional specification
ATE_FUN.1 Functional testing
Developer action elements:
ATE_COV.1.1D The developer shall provide evidence of the test coverage.
Content and presentation elements:
ATE_COV.1.1C The evidence of the test coverage shall show the correspondence
between the tests in the test documentation and the TSFIs in the
functional specification.
Evaluator action elements: