26
English
Using the Menus
Picture (In the PC mode)
Option Description
Auto Adjustment
Use the Auto Adjust function to have the TV set
automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and
adjusts the frequency values and positions.
Screen
Coarse ■ / Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise. If the noise is not removed by Fine-
tuning alone, then adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been
reduced, readjust the picture so that it is aligned on the
centre of screen.
PC Position ■
Adjust the PC’s screen positioning if it does not fit the TV
screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset ■
You can replace all image settings with the factory default
values.
Preset ■ : Press the SOURCE
button to select PC mode.
This function does not work in ■
DVI-HDMI mode.
Press the ■ TOOLS button to
display the Tools menu. You can
also set the Auto Adjustment
by selecting Tools → Auto
Adjustment.
Brightness : 45
Sharpness : 50
Auto Adjustment ►
Screen
Advanced Settings
Picture Options
Picture Reset
Picture
[430(19)-UK]BN68-03043G-Eng.indb 26 2010-04-12 �� 9:35:59
To Next Page
Loading...
