Setup Menu
Setup
Option Description
Menu Language
You can set the menu language.
Time Clock ❑
Setting the clock is necessary in order to use the various timer
features of the TV. If you disconnect the power cord, you have
to set the clock again.
Clock Mode ■
You can set up the current time manually or automatically.
Auto : Set the current time automatically using the time
from the digital broadcast.
Manual : Set the current time to a manually specified time.
■ Clock Set
You can set the current time manually.
This function is only available when Clock Mode is set
to Manual.
You can set the day, month, year, hour and minute
directly by pressing the number buttons on the remote
control.
Sleep Timer ❑
The sleep timer automatically shuts off the TV after a preset
time (30, 60, 90, 120, 150 and 180 minutes).
The TV au ■ tomatically switches to standby mode when the
timer reaches 0.
To cancel the ■ Sleep Timer function, select Off.
Timer 1 / Timer 2 / Timer 3 ❑
Three different on / off timer settings can be made.
You must set the clock first.
On Time ■
Set the hour, minute, and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to
Activate.)
Off Time ■
Set the hour, minute, and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to
Activate.)
Volume ■
Set the desired volume level.
Antenna ■
Select Air or Cable.
Channel ■
Select the desired channel.
Repeat ■
Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual.
When Manual is selected, press the ► button to select
the desired day of the week. Press the ENTERE button
over the desired day and the c mark will appear.
Auto Power Off ■
When you set the timer on, the
TV will be eventually turned off,
if no controls are operated for 3
hours after the TV was turned on
by the timer. This function is only
available in timer on mode and
prevents overheating, which may
occur if a TV is on for too long
time.
Press the ■ TOOLS button to
display the Tools menu. You
can also set the sleep timer by
selecting Tools → Sleep Timer.
You can set the hour, minute and ■
channel by pressing the number
buttons on the remote control.
Plug & Play
Menu Language : English ►
Time
Broadcast
Security
General
Setup
The current time will appear ■
every time you press the INFO
button.
Depending on the broadcast ■
station and signal, the auto time
may not be set correctly. If this
occurs, set the time manually.
The Antenna or cable must be ■
connected in order to set the time
automatically
The current time will appear ■
every time you press the INFO
button.
[430(19)-UK]BN68-03043G-Eng.indb 29 2010-04-12 �� 9:36:00
To Next Page
Loading...
