English-29
You can display Teletext information at any time, but signal reception must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the Teletext mode and display the contents page:
1. Using the P
( ) or P ( ) button, select the channel providing the
Teletext service.
2. Press the TTX/MIX (
) button to activate the Teletext mode.
The contents page is displayed. It can be redisplayed at any time by pressing the
MENU (
) button.
3. Press the TTX/MIX ( ) button again.
The actual broadcast will be displayed with “Teletext”, “Double”, and “Mix” in order
on the screen.
4. Press the TV/DTV button to exit from the Text display.
If any broken character appears while Text is being viewed, make sure that the Text language is
identical with the language in the "Setup" menu mode. If both languages are different, select the same
language with the Text language on the "Setup" menu.
Displaying the Teletext Information
Teletext Decoder
Most set channels carry " Teletext ", pages of written information that provide
information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The Teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
Status information.
BN68-01007J-00Eng.indd 29BN68-01007J-00Eng.indd 29 2006-08-09 10:36:292006-08-09 10:36:29
To Next Page
Loading...
