Samsung LE40A536T1F - Changing the Picture Standard

English - 16
You can select the type of picture which best corresponds to
your viewing requirements.
1. Press
the MENU button to display the menu.
Press the ENTER
button, to select "Picture".
2
. Press the ENTER
button again, to select "Mode".
3
. Press the
▲ or ▼ button to select the desired picture effect.
Press the ENTER
button.
4
. Press the EXIT
button to exit.
♦ Dynamic: Selects the picture for high-definition in a bright
room.
♦ Standard: Selects
the picture for optimum display in a
normal environment.
♦ Movie: Selects
the picture for comfortable display in a
dark room.
The Picture mode must be adjusted separately for each
input source.
Changing the Picture Standard
Picture
Mode : Standard 
Backlight
7
Contrast 95
Brightness 45
Sharpness 50
Colour
50
Tint G 50 R 50
Detailed Settings 
Picture Options 
Reset
: OK 
TV
Move Enter Return
Picture
Mode : Standard
Backlight
7
Contrast 95
Brightness 45
Sharpness 50
Colour
50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
TV
Move Enter Return
Dynamic
Standard
Movie
Easy Setting
1. Press
the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Picture Mode".
3. Press the ◄ or ► button to select the required option.
4. Press the EXIT
or TOOLS button to exit.
Anynet+ (HDMI-CEC)
Picture Mode ◄ Standard ►
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Tools
Move Adjust Exit
BN68-01464G-Eng.indd 16 2008-09-17 �� 3:11:54