1 Television Standby button
2 Selects
the TV and DTV
mode directly
3 Number buttons for direct
channel
access
4
One/Two-digit channel
selection
5
+
: Volume increase
: Volume decrease
6 Temporary sound switch-off
7 Electronic
Program Guide
(EPG) display
8 Use to quickly select
frequently used functions.
9 Use
to see information on
the current broadcast
0 Colour buttons :
Use these buttons in the
Channel list, etc.
@
Press to select the optional
display and sound modes for
sports, cinema and games.
#
Use these buttons in the
DMA, and Anynet
+
.
(
∏
: This remote can be
used to control recording on
Samsung recorders with the
Anynet
+
feature)
$ Available source selection
% Previous channel
^ P
: Next channel
P
: Previous channel
& Displays the main on-screen
menu
* Displays the Channel List on
screen
( Returns
to the previous
menu
) Control
the cursor in the
menu
a Exit the on-screen menu
b Use this when connecting
a SAMSUNG DMA (Digital
Media Adapter) device
through an HDMI interface
and switching to DMA
mode.(The DMA button is
optional.)
For more information on the
operating procedures, refer to
the user manual of the DMA.
This button is available when
“Anynet
+
(HDMI-CEC)" is “On”
(see page 47)
c Picture size selection
d Digital subtitle display
e Selects the HDMI mode
directly.
Teletext
Functions
2 Exit from the teletext display
7 Teletext store
8 Teletext size selection
9 Teletext reveal
0 Fastext topic selection
! Alternately
select Teletext,
Double, or Mix.
$ T
eletext mode selection
(LIST/FLOF)
% Teletext sub page
^ P
: Teletext next page
P
: Teletext previous page
& Teletext index
( Teletext hold
a Teletext cancel
The performance of the remote control may be affected by bright light.
➣
Viewing the Remote Control
To Next Page
Loading...
