English - 54
Once the auto wall mount is installed, your TV’s position can be easily adjusted.
This function is optional and may not be supported.
➣
Wall-Mount Adjustment
TV Rear Panel Auto Wall-Mount
SERVICE Cable (Not supplied)
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
The Wall Mount Adjustment screen is displayed.
If the Wall Mount Adjustment screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
•
Press the MENU butt on to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
EN
TER
button.
•
Press the ▲ or ▼ button to select “Wall-Mount Adjustment”,
then press the EN
TER
button.
Remembering the Position
2
. Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to
select “Yes”, then press the EN
TER
button.
The position is initialized to the default setting.
3
. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
To not save the current position, press the RE
TURN button.
When selecting a save mode, you cannot use the Colour
buttons.
4
. Press the EN
TER
button to save.
When Position1 is selected, the message "Current position
saved as Position1" is displayed.
5
. Press the EN
TER
button.
The saved Position appears on the left side of the OSD.
➣
➣
➣
➣
➣
➣
➣
➣
TV
Setup
Plug & Play
Language : English
Time
W
all-Mount Adjustment
Melody : Off
Entertainment : Off
Energy Saving
: Off
Move Enter Return
Save
Select a mode to Save.
Position1
Position2
Position3
Move Enter Return
Wall-Mount Adjustment
Adjust Save Center
INFO
Position 1 2 3
To Next Page
Loading...
