Samsung LH008IWJ Series - S-BOX Connection (Grouping)

Samsung Electronics
[Cautions!!]
1) Before executing S-Box Grouping in LED Signage Manager (LSM), make sure to set the resolution of
the input source equipment to S-Box Grouping supported resolution..
2) When entering a resolution that does not support, the screen may not be visible or noise may occur
on the screen. After turning off the Video Wall function, change the frequency of the video output
source to 50 Hz or 60 Hz.
3) ※ LSM support S-Box Grouping.
① Enable S-Box Grouping
 Home → Video Wall : OFF → On
86
8. S-BOX Installation and Connection
• S-BOX Connection (Grouping)