Need help?Do you have a question about the Samsung LH067XATSAC and is the answer not in the manual?
General| Product Type | Digital Signage |
|---|---|
| Screen Size | 67 inches |
| Contrast Ratio | 4000:1 |
| Viewing Angle | 178° (H) / 178° (V) |
| Operating Temperature | 0°C to 40°C |
| Connectivity | HDMI, USB |
| Resolution | 1920 x 1080 (Full HD) |
Explains warning symbols, grounding, and electric safety precautions.
Provides guidelines for personal and equipment safety during installation and operation.
Provides instructions and warnings for product installation.
Illustrates the front view of the package and unpacking steps.
Illustrates the side view of the package and unpacking steps.
Describes the correct method for placing the cabinet after unpacking.
Lists detailed technical specifications for the XAT6.7, XAT10, and XAT16 models.
Shows visual representations of the product's appearance.
Illustrates the internal decomposition and wiring of the product.
Identifies and shows images of the main components of the product.
Explains the connection diagram for the LED display system.
Lists and shows images of included accessories with part numbers.
Lists and shows images of spare parts with part numbers.
Provides a Bill of Materials for parts with codes, names, specs, and units.
Lists service parts for XAT 6.7 with specs, codes, and quantities.
Lists service parts for XAT 10 with specs, codes, and quantities.
Lists service parts for XAT 16 with specs, codes, and quantities.
Lists common display screen issues and their troubleshooting steps.
Lists common cabinet issues and their troubleshooting steps.
Lists common module issues and their troubleshooting steps.
Details support structure, ground stability, and tools for installation.
Covers power system, cabling, grounding, and lightning protection.
Illustrates the connection between the Sending box and PC.
Explains how to connect power cables, including cascade connections.
Explains how to connect data cables, including cascade connections.
Provides sample drawings for cabinet arrangement and installation.
Guides through the installation process for the NovaLCT software.
Describes how to access and navigate the NovaLCT main interface.
Details the main menu options and their descriptions within NovaLCT.
Explains how to configure screen settings and load configuration files.
Details how to configure the Scan Board settings in NovaLCT.
Explains how to set up screen connections within NovaLCT.
Guides on adjusting color settings, including gain, brightness, and color space.
Details manual and automatic methods for adjusting brightness and Gamma.
Explains how to control screen functions like Black Out, Freeze, and Self Test.
Guides on how to check hardware status and program version information.
Details the process for online brightness and color calibration.
Details how to set calibration coefficients for a new receiving card.
Details how to set calibration coefficients for a new module.
Explains how to adjust calibration coefficients for specific areas of the display.
Describes how to erase or reload calibration coefficients for the display.
Explains how to reset calibration coefficients for the screen or specified areas.
Guides on monitoring the status of hardware components using NovaLCT.
Details how to configure alarms for critical temperature, humidity, fan speed, and voltage.
Guides on setting up email notifications for system events and reports.
Explains how to view and manage email notification logs.
Provides instructions and necessary tools for cleaning the outdoor LED display screen.
Explains factory and site calibration for color uniformity.
Details the procedure for front-service module replacement.
Details the procedure for front-service power supply replacement.
Details the procedure for front-service HUB board replacement.
Details replacing Receiving Card and Air Switch from the front.
Details the procedure for front-service air switch replacement.
Details replacing power/signal cascade cables from the front.
Describes how to open the back door of the cabinet for service.
Details the procedure for back-service module replacement.
Details the procedure for back-service power supply replacement.
Details the procedure for back-service HUB board replacement.
Details replacing Receiving Card and Air Switch from the back.
Details replacing AC input and signal input cables from the back.
Details replacing Flat and DC power cables from the back.
Outlines customer responsibilities for service costs and product damage.
Indicates proper disposal and recycling of the product and accessories.
To Next Page
