EasyManua.ls Logo

Samsung LH75OMREBGB - User Manual

Samsung LH75OMREBGB
115 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
The colour and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
This manual provides common information for all Smart Signage models regarding safety precautions, options to connect the product, and product features.
Series: QBN, QBR, QMN, QMR, QEN, OMN, OMN-D, OHN, OHN-DK, VMR-U, QPR-8K, QER, OMR, QHR, SHR, QMR-T, QBR-T, QMR-A
Smart Signage User Manual (Common Use)

Table of Contents

Questions and Answers

  • J
    joe76Aug 10, 2025
    How to fix Anynet+ not working on Samsung Digital Signage?
    • S
      Steven MccoyAug 10, 2025
      If Anynet+ is not working on your Samsung Digital Signage, first verify that the connected device is Anynet+ compatible. Ensure the power cord and the Video/Audio/HDMI cable are properly connected. Also, check if Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup. If you've reconnected the HDMI cable, rescan for devices or power cycle your device. Finally, confirm that the Anynet+ function is enabled on the external device.
  • Y
    yfernandezAug 16, 2025
    What to do if connected device is not displayed on Samsung LH75OMREBGB Digital Signage?
    • J
      jonesvalerieAug 16, 2025
      If your connected device is not displayed on your Samsung Digital Signage, ensure that the device supports Anynet+ functions and that the HDMI cable is correctly connected. Check that Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Anynet+ requires an HDMI connection. Also, be aware that some HDMI cables might not support Anynet+ functions. If there was a power failure or the HDMI cable was disconnected, repeat the device scan.
  • J
    James PattonAug 22, 2025
    How to start Anynet+ on Samsung LH75OMREBGB?
    • R
      Rodney WilcoxAug 22, 2025
      To start Anynet+ on your Samsung Digital Signage, ensure that the Anynet+ device is correctly connected to the product. Then, verify that Anynet+ (HDMI-CEC) is turned on in the System menu.
  • J
    Justin McgeeAug 29, 2025
    How to exit Anynet+ on Samsung LH75OMREBGB Digital Signage?
    • M
      Misty Cuevas MDAug 29, 2025
      To exit Anynet+ on your Samsung Digital Signage, press the SOURCE button on the remote control and select a device that is not Anynet+ compatible.
  • H
    Hector GuerraSep 3, 2025
    What to do if Samsung LH75OMREBGB Digital Signage says “Disconnecting Anynet+ device ...”?
    • R
      Richard HendersonSep 4, 2025
      If you see the message “Disconnecting Anynet+ device ...” on your Samsung Digital Signage, it means you cannot use the remote control while configuring Anynet+ or switching to a view mode. Please wait until the configuration or switching process is complete before using the remote control.

Samsung LH75OMREBGB Specifications

General IconGeneral
Contrast Ratio4000:1
Viewing Angle178°/178°
Response Time8 ms
Operating SystemTizen
OrientationLandscape / Portrait
Operating Hours24/7
Operating Temperature0°C to 40°C
Power Consumption220 W
Standby Power Consumption0.5 W
VESA Mount600 x 400 mm
Screen Size75 inches
Resolution3840 x 2160
Brightness500 nit
ConnectivityWi-Fi, Bluetooth
Storage Temperature-20℃ ~ 45℃
Input PortsHDMI x 2, USB x 2, Ethernet x 1

Related product manuals