Samsung LN-S2641D - Channel Control; Selecting the Antenna; Setting the Channel Manager

English-32
Press the ANTENNA button on the remote control.
or
Setting the Channel Manager
1. Press the MENU button to display the menu.
Press the  or  buttons to select “Channel”, then press the ENTER button.
2. Press the  or  buttons to select “Channel Manager”,
then press the ENTER button.
3. Press the ENTER button to select “All”.
4. Press the  or  buttons to select a channel to delete,
then press the
ENTER button.
Press the
 or  buttons to select “Delete”, then press the ENTER button to
delete the channel.
You can add or delete a channel so only channels you want are displayed.
Selecting the Antenna
1. Press the MENU button to display the menu.
Press the  or  buttons to select “Channel”, then press the ENTER button.
2. Press the ENTER button to select “Antenna”.
Press the  or  buttons to select “Air” or “Cable”,
then press the ENTER button.
Press the
EXIT button to exit.
If the antenna is connected to ANT 1 IN (AIR),
select “Air” and if it is connected to ANT 2 IN (CABLE),
select “Cable”.
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are
connected, select the antenna input you want. If the antenna
input is not selected properly, noise may appear on the screen.
Channel Control