Samsung LN-T5271F - Picture Control: Color Enhancements; Gamma, Color Space, and White Balance Adjustments

English - 24
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ▲ or ▼ button to select "Color Tone", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Cool2", "Cool1", "Normal", "Warm1"
or "Warm2".
Press the ENTER button.
When the picture mode is set to "Dynamic" or "Standard", "Warm1" and
"Warm2" cannot be selected. "Movie" mode is only available.
Each adjusted setting will be stored separately according to its input mode.
Move Enter Return
▲More
Color Tone : Cool1
►
Detailed Settings ►
Size : 16 : 9
►
Digital NR : Auto
►
Active Color : On
►
DNle
: On ►
▼More
PictureTV
Move Enter Return
▲More
Color Tone : Cool2
Detailed Settings
Size : 16 : 9
Digital NR : Low
Active Color : On
DNle
: On
▼More
PictureTV
Cool2
Cool1
Normal
Warm1
Warm2
Resetting the Picture Settings to the Factory Defaults
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER button.
Press the ▲ or ▼ button to select “Cancel” or “OK” then press the ENTER button.
Press the EXIT
button to exit.
Each mode can be reset.
Move Enter Return
▲More
Auto Motion Plus 120Hz : Low
Reset : OK ►
PictureTV
OK
Cancel
BN68-01310A-00Eng_0709.indd 24 2007-07-20 �� 3:25:51