English - 32
Viewing Picture-in-Picture
This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV
channel in the main screen and a different one in the PIP screen. Please see ‘PIP Settings’ below for details. You can use the PIP
feature to simultaneously watch two video sources. (See page 38 to select the PIP picture sound.)
While V-Chip (See page 58) is in operation, the PIP function cannot be used.
While xvYCC (See page 28) is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
Press the ▲ or ▼ button to select "PIP", then press the ENTER
button.
2. Press the ENTER
button again.
Press the▲ or ▼ button to select "On", then press the ENTER
button.
If you turn the TV off while watching in PIP mode and turn it on again, the PIP
window will disappear.
You can view Analog TV broadcasts on the PIP screen (sub-picture) when the
main picture is from an external device connected to HDMI1, 2, 3,
Component1,2 or PC
Main picture Sub picture
Component 1,2
HDMI 1,2,3
PC
Analog TV broadcasts only
Alternately, you can press the PIP button on the remote control repeatedly to activate or
deactivate the PIP.
Move Enter Return
PIP :
Size :
Position :
Channel : Air 3
PIPTV
Off
On
Changing the PIP Channel
3. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
Press the ▲ or ▼ button to select the desired channel in the PIP window.
Press the ENTER button.
MAIN: PC / HDMI 1,2,3 / Component 1,2
PIP: TV(Analog)
Alternatly, you can press the PIP Channel buttons on the remote control.
Move Enter Return
PIP : On ►
Size : ►
Position : ►
Channel : Air 3 ►
PIPTV
Move Enter Return
PIP : On
Size :
Position :
Channel : Cable 3
PIPTV
▲
Air 3
▼
Setup
▲ More
HDMI Black Level : Low ►
Film Mode : Off ►
Wall-Mount Adjustment ►
PIP ►
Function Help : On ►
SW Upgrade ►
TV
Move Enter Return
To Next Page
Loading...
