◀ ▶
English
❑ Setting Up Anynet+
MENU
m
→
System
→
Anynet+ (HDMI-CEC)
→
ENTER
E
■
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, you must set
Anynet+ (HDMI-CEC) to On.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related
operations are deactivated.
Auto Turn Off (No / Yes): Set an Anynet+ Device to turn off automatically when
the TV is turned off.
If Auto Turn Off is set to Yes, running external devices will turn off at the
same time as the TV turns off.
Auto Turn Off may not be enabled depending on the device.
To Next Page
Loading...
