3-1
3. Disassembly and Reassembly
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LCD TV.
WARNING: This LCD TV contains electrostatically sensitive devices. Use caution when handling these components.
3-1. Disassembly and Reassembly
Cautions: 1. Disconnect the LCD TV from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
Description Picture Description Screws
1. Place monitor face down on cushioned table.
- Remove 3 screws from the stand.
- Remove stand.
- If you want to change the Main/IP board,
stand removal is not required.
(See the #5 - Remove Stand Link.)
6002-001294
(M4, L16,Tapping)
To Next Page
Loading...
