Samsung LN26C350D1D - Factory Mode Adjustments

4-26
4. Troubleshooting
4-3. Factory Mode Adjustments
4-3-1 Entering Factory Mode with Factory Remote-control
Turn the power on LCD TV SET.1.
To enter `2. Service Mode' Press the remote -control keys in this sequence
info

factory key
If you want exit Factory mode, press '3. Factory' key in Remote-cotrol.
4-3-2 Entering Factory Mode with Customer Remote-control
Using the Customer Remote
Turn the power off and set to stand-by mode1.
Press the remote buttons in this order; 2. MUTE  1  8  2  POWER ON to turn the set on.
MUTE 1 8 2 Power On
The set turns on and enters service mode. This may take approximately 20 seconds.3.
Press the Power button to exit and store data in memory. 4.
- If you fail to enter service mode, repeat steps 1 and 2 above.
Initial SERVICE MODE DISPLAY State5.
If you wnat exit Factory mode, Turn the power off LCD TV Set by remote control or Power code. 6.
Option
ADC/WB
Control
Advanced
T-SAT4AUSHC-XXXX
DTP-LP-App-XXXX-XX
ADC : HDMI X COMP X PC X AV X
EDID : SUCCESS
HDCP : SUCCESS
Build Date : XX-XX-XXXX
Date Of Purchase : XX/XX/XX
* How to enter the hidden factory mode.
a. Into the factory mode
b. Highlight Advanced
c. Key input : 0 + 0 + 0 + 0
** hidden menu : Advanced
6. Buttons operations withn Service Mode
Menu Full Menu Display/Move to Parent Menu
Direction Keys /
Item Selection by Moving the Cursor
Direction Keys /
Data Increase / Decrease for the Selected Item
Source
Cycles through the active input source that are connected to the unit