To Next PageTo Next PageWhy is closed captioning not working on my Samsung LCD TV?
If Closed Captioning is not working on your Samsung LCD TV and you are using a Cable/Satellite box, you must set Closed Captioning on the box, not your TV.
Why is there ghosting on my Samsung LN32A330J1D LCD TV picture?
If you notice ghosting on the picture of your Samsung LCD TV, this is sometimes caused by compatibility issues with your cable box. Try connecting component cables instead.
Why is my Samsung LN32A330J1D LCD TV screen black and the power light blinking?
If the screen of your Samsung LCD TV is black and the power indicator light blinks steadily, check the power and signal cable connections on your computer. The TV may be using its power management system. Try moving the computer's mouse or pressing any key on the keyboard.
Why is the image unstable when connecting a computer to my Samsung LN32A330J1D LCD TV?
If the image is not stable and appears to vibrate when you have a computer connected to the PC input on your Samsung LCD TV, use your computer utility program to change the display settings to the correct ones.
How to center the image on my Samsung LN32A330J1D LCD TV screen?
If the image is not centered on the screen of your Samsung LCD TV, adjust the horizontal and vertical position. Note that the screen position must be adjusted on the output source (i.e., STB) with a digital signal.
Why is the picture distorted in the corner of my Samsung LN32A330J1D?
If the picture appears distorted in the corner of the screen of your Samsung LCD TV, and "Just Scan" is selected with some external devices, this symptom is caused by the external devices, not the TV.
Why does my Samsung LCD TV say 'Resets all settings to the default values'?
The “Resets all settings to the default values” message appears on your Samsung LCD TV when you press and hold the EXIT button for a while. This resets the product settings to the factory defaults.
Why is my Samsung LN32A330J1D operating erratically?
If your Samsung LCD TV is operating erratically, unplug the TV for 30 seconds, then try operating it again.
How to fix poor picture quality on Samsung LN32A330J1D LCD TV?
If you are experiencing poor picture quality on your Samsung LCD TV, try the following: * Try another channel. * Adjust the antenna. * Check all wire connections.
How to fix the image being too light or too dark on Samsung LN32A330J1D LCD TV?
If the image on your Samsung LCD TV is too light or too dark, adjust the Brightness and Contrast. Also, adjust the Fine tuning.
Crucial safety guidelines for handling the TV to prevent damage and hazards.
Precautions specific to servicing the LCD TV, including capacitor warnings.
Techniques to reduce component damage caused by static electricity.
Safety measures during product installation, including ventilation and cable handling.
Detailed features and technical specifications for specific TV models.
Comparison of new TV models with older versions.
List of included accessories with the TV product.
Step-by-step instructions for disassembling the TV.
Troubleshooting guide based on specific symptoms and board issues.
General troubleshooting steps and common issues like no power or video.
Procedures for aligning and adjusting TV settings.
Accessing and using factory mode settings for adjustments.
Process for calibrating white balance for accurate color reproduction.
Adjusting white balance ratios for different input sources.
Information relevant to servicing, including firmware updates.
Exploded view of the LN26A330J1D model.
Part list for the LN26A330J1D model.
Exploded view of the LN32A330J1D model.
Part list for the LN32A330J1D model.
Exploded view of the LN37A330J1D model.
Part list for the LN37A330J1D model.
Exploded view of the LN40A330J1D model.
Part list for the LN40A330J1D model.
Wiring diagram for the 26-inch model.
Wiring diagram for the 40-inch model.
Visuals and part codes for various TV cables.
Block diagram of the Scaler IC (MSD2248AL).
General block diagram of the schematic.
General