To Next PageTo Next PageWhy does my Samsung LN32A330J1D LCD TV show “Resets all settings to the default values”?
The “Resets all settings to the default values” message appears on your Samsung LCD TV when you press and hold the EXIT button for a while. The product settings are then reset to the factory defaults.
How to fix vertical bars that flicker on my Samsung LN32A330J1D LCD TV?
If vertical bars appear to flicker, jitter, or shimmer on the image of your Samsung LCD TV, adjust the Coarse tuning and then adjust the Fine tuning.
How to fix horizontal bars that flicker on my Samsung LN32A330J1D?
If horizontal bars appear to flicker, jitter, or shimmer on the image of your Samsung LCD TV, adjust the Coarse tuning and then adjust the Fine tuning.
How to fix a Samsung LCD TV picture with a Red/Green or Pink tint?
If your Samsung LCD TV picture has a Red/Green or Pink tint, make sure the Component cables are connected to the correct jacks.
How to fix the image being too light or too dark on Samsung LN32A330J1D LCD TV?
If the image on your Samsung LCD TV is too light or too dark, adjust the Brightness and Contrast. Also, adjust the Fine tuning.
How to fix poor picture quality on Samsung LN32A330J1D LCD TV?
If you are experiencing poor picture quality on your Samsung LCD TV, try the following: * Try another channel. * Adjust the antenna. * Check all wire connections.
Crucial safety guidelines for handling the TV to prevent damage and hazards.
Precautions specific to servicing the LCD TV, including capacitor warnings.
Techniques to reduce component damage caused by static electricity.
Safety measures during product installation, including ventilation and cable handling.
Detailed features and technical specifications for specific TV models.
Comparison of new TV models with older versions.
List of included accessories with the TV product.
Step-by-step instructions for disassembling the TV.
Troubleshooting guide based on specific symptoms and board issues.
General troubleshooting steps and common issues like no power or video.
Procedures for aligning and adjusting TV settings.
Accessing and using factory mode settings for adjustments.
Process for calibrating white balance for accurate color reproduction.
Adjusting white balance ratios for different input sources.
Information relevant to servicing, including firmware updates.
Exploded view of the LN26A330J1D model.
Part list for the LN26A330J1D model.
Exploded view of the LN32A330J1D model.
Part list for the LN32A330J1D model.
Exploded view of the LN37A330J1D model.
Part list for the LN37A330J1D model.
Exploded view of the LN40A330J1D model.
Part list for the LN40A330J1D model.
Wiring diagram for the 26-inch model.
Wiring diagram for the 40-inch model.
Visuals and part codes for various TV cables.
Block diagram of the Scaler IC (MSD2248AL).
General block diagram of the schematic.
General
