4-19
4. Troubleshooting
4-1-8. No Video (S-Video 1, 2)
Symptom Audio is normal but no picture is displayed on the screen.-
Major
checkpoints
Check the S-Video source
Check the MT5382
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.
-
-
-
Diagnostics
Check CN901B or Side-AV
Change the main PCB ass’y or
Side-AV assembly
No
Yes
Power Indicator is off.
Lamp on, no video
Yes
Check the video source and
check the connection of
video cable?
No
Input a video signal.
Check the connected cable.
Yes
Check the LVDS cable?
Replace the LCD panel?
Please, Contact 1 800 Samsung
No
Does the digital data appear at output
of R721~R740,R788~R791?
No
Check IC400
Change the main PCB assembly
9
6
Does the signal appear
at C706, C707 (Y, C) of IC400?
Yes
Does the digital data appear at output
of R1109, R1110, R1113P, R1114P,
R1116P, R1120P, R1122~R1128,
R1133, R1135, R1137P~R1141P,
R1143~R1150?
No
Check IC400
Change the main PCB assembly
7
Yes
Caution Make sure to disconnect the power before working on the IP board.