Samsung LN32A650A1F - Factory Mode Adjustments

4-20
4. Troubleshooting
4-3. Factory Mode Adjustments
4-3-1 Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
- If you do not have Factory remote - control
MUTEPower OFF 1 8 2 Power On
MUTEOR 1 1 9 ENTER
4-3-2 How to Access Service Mode
Using the Customer Remote
Turn the power off and set to stand-by mode
Press the remote buttons in this order; POWER OFF-MUTE-1-8-2-POWER ON to turn the set on.
The set turns on and enters service mode. This may take approximately 20 seconds.
Press the Power button to exit and store data in memory.
- If you fail to enter service mode, repeat steps 1 and 2 above.
Initial SERVICE MODE DISPLAY State
OptionByte
ADC
ADC Target
ADC Result
WB
WB_Movie
EPA Standard
BHP_VDEC
MST336C
BHP_DP
Sharpness
FBE3
Dynamic Contrast
LNA+
Expert Settings
Expert D-Settings
Expert Gray Scale
Expert C-Space
Expert Others
SOUND
FRCM_Option
Hotel Option
EDID
CHECKSUM 0x0000
DEFECT LOG
Font Data Viewer
T-AMBAUSC-0040
T-AMBAUSM-0005
RFS : T-AMBAUS-20071130
2007-12-19
PANEL : 40AML_529A
LN40A650
EDID FAIL
0100 0010 011c 0000 c00c
0000 0
CALIB : AV O COMP O PC O HDMI O
DTP-LM-0072
Date of purchase : 00/00/0000
- “T-AMBAUSC-0040” and “T-AMBAUSM-0005” are rmware....
Buttons operations withn Service Mode
Menu Full Menu Display/Move to Parent Menu
Direction Keys /
Item Selection by Moving the Cursor
Direction Keys /
Data Increase / Decrease for the Selected Item
Source
Cycles through the active input source that are connected to the unit
1.
2.
3.
4.
5.
6.