Samsung LN32B530 - Recording; Listening through a Receiver (Home theater)

To connect to Home Theater
~,~ HDMI1.3 Cable
i, I'
"'CJ
-----·-·--l
Anynet+ Device 2 I
I
I
'-&5
Anynet+ Device 1
HDMI1.3 Cable
c
.
, .
TV
Home Theater
Anynet+ !:levice 3
l" .~., 'v'"J
L_~ 0_p~ti_ca_l_c_ab_le H_D_M_I_1,_3 _ca_b_le I .. _' __ Y_
1
_'_;Y~,"_·-_- H:D_M __ I __ 1_'_3 __ c_a:b_l_e::-.-, i i
1. Connect the HDMIIN (1, 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI
cable.
2, Connect the HOM I IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI
cable.
ifIJ Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the
Home Theater
i2l When following the connection above, the Optical jack only outputs 2 channel audio, You will only hear sound from the Home
Theater's Front Left and Right speakers and the subwoofer If you want to hear 5,1 channel audio, connect the DIGITAL
AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theater,
not the TV
i2l Connect only one Home Theater
i2l You can connect an Anynet+ device using the HDMI 1,3 cable Some HDMI cables may not support Anynet+ functions.
i2l Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
i2l Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type,
• Setting Up Anynet+
;'j Press the TOOLS button to display the Tools menu, You can also display Anynet+ menu by selecting Tools -. Anynet+
(HDMI-CEC)
LJ Setup
Anynet+ (HDMI-CEC) -> Off / On
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On,
i2l When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations
are deactivateci,
Auto Turn Off -. No I Yes
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
i2l The active source on the TV remote must be set to TV to use the Anynet+ function,
i2l If you set Auto Turn Off to Yes, connected external devices are also turned off when the
TV is turned off, If an external device is still recording, it mayor may not turn off.
~
~~-- 1
ynel>(HDMI·CECI On
TurnOff Yes I
L_ ~~
• MOlle [3l Enter ~ Return