•
Switching
between
Anynet+
Devices
1.
Press the TOOLS button. Press the ENTER
[3l
button
to
select
Anynet+
(HDMI-CEC).
2.
Press
the.
or
~
button
to
select Device
List,
then press the ENTER
[3l
button.
(%ZJ
Anynet+ devices connected to the TV are listed.
(!'J
If you cannot find a device you want, press the red button to scan for devices.
3.
Press
the.
or
~
button to select a particular device and press the ENTER
[3l
button. It
is
switched to the selected device.
(!'J
Only when you set
Anynet+
(HDMI·CEC) to
On
in
the
Application
menu, the Device
List
menu appears.
~
Switching to the selected devices may take
up
to
2 minutes
You
cannot cancel the
operation during the sWitching operation.
(!'J
The time required to scan for devices
is
determined by the number of connected devices.
~
When the device scan
is
complete, the number of devices found are not displayed.
(!'J
Although the TV automatically searches the device list when the TV
is
turned
on
via the power button, devices connected to
the TV when the
TV
is
on or under some conditions are not automatically displayed
in
the device list. Press the
red
button to
search for the connected device.
~
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to
an
Anynet+ device by using the Device List.
Anynet+
Menu
The Anynet+ menu changes depending
on
the type and status of the Anynet+ devices connected to the
TV
Anynet+
Menu
I_D_e_s_c_ri-'-p_ti_o_n
. _
__
View._!.~
. .
~-nJne~~~d~.£-~anges
to
.
.!.y
bro~dca~~
mo~~
...
..
_
......
_
.....
__
..
.
Device
List
IShows the Anynet+ device list.
--------
I - .
I Shows the connected device menus. E.g. If a DVD recorder
is
connected, the disc menu of the
(device_name) Menu
I
___
-tI_D_V_D_re_c_o_rd_e_r_w_il_1
a--'p-'-p_e_a_r.
_
(device name)
Operation
!Shows the play menu of the connected device. E.g. If a DVD recorder
is
connected, the play
-------=---;-----------------i
men~
the_DV'2_
rec.<?rde~_~~pear
..
.
~.--
__
------
Record: ( recorder) iStarts recording Immediately uSlllg the recorder. (This
IS
only available for devices that support
..
Ithe recording function.)
Stop
Recording:
('recorder) iStops recording.
------------t-::-'-----"'--
__
~~~_~~~~
~~~~p.layed
throug~
the
r~~ver_.
__
._.
.
..
__
.
__
~
If more than one recording device
is
connected, they are displayed
as
('recorder) and if only one recording device
is
connected, it will be represented as ('device_name).
TV
Remote
Control
Buttons
Available
in
Anynet+
Mode
Device
Type
___
~==I
Operating
Status
------.=1
Available
Buttons
_
iAfter switching to the device, when the menu Numeric buttons
./~
/
~/~/ENTER
OJIbuttons
Iof the corresponding device
is
displayed on the Color buttons / EXIT button
I screen.
IG (Backward search) / G (Forward
!lsearCh) /
o (Stop)
/8
(Play)
/0
(Pause)
----
Iv CH A button
-+-
________
l.:
VOL
+ / MUTE button
IWhen Receiver
is
activated
I
i After switching to the device, while playing a file
I
IAfter switching to the device, when you are
!watching a TV program
Audio
Device
Device
with
built·in
Tuner
Anynet+
Device
(!'J
The
tnynr+
function only works when the active source
on
the TV remote control
is
set to
TV
(!'J
The • button works only while
in
the recordable state.
~
You
cannot control Anynet+ devices using the buttons
on
the
TV
You
can control Anynet+ devices only using the TV remote
control.
~
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
~
The
tnynr+
functions do not operate with other manufacturers' products.
(!'J
The ....
,GJ
operations may differ depending
on
the device.
To Next Page
Loading...
