TOOLS
~
!~:~.~.t
I
'r
D~~::~~on
.
J'
Setup
G-E~t;-
':>
Return
o
Move
• Recording
You
can
make a recording of a TV program using a Samsung recorder.
1.
Press the TOOLS button. Press the
ENTERG
button
to
select Anynet+ (HDMI-CEC).
2.
Press
the.
or T button
to
select Recording Immediately and press the
ENTERG
button.
Recording begins.
rtJ
When there is more than one
recording
device
When multiple recording devices are connected, the recording devices are listed.
Press
the.
or T button
to
select a recording
device
and press the ENTER G button.
Recording begins.
[~
When the
recording
device is
not
displayed
Select Device
List
and press the
red
button
to
search devices
3.
Press the EXIT button
to
exit.
I2J
You
can record the source streams
by
selecting Record:
(device_name).
rtJ
Pressing the CD button will record whatever you are currently watching. If
you
are watching
video
from another
device,
the
video
from the
device
is
recorded.
rtJ
Before recording, check whether the antenna jack
is
properly connected
to
the recording device.
To
properly connect
an
antenna
to
a recording
device,
refer
to
the recording device's users manual.
• Listening through a Receiver (Home theater)
You
can
listen
to
sound through a receiver instead of
the
TV speaker.
1.
Press
the
TOOLS button. Press the ENTER G button
to
select Anynet+ (HDMI-CEC).
2.
Press
the.
or T button
to
select Receiver. Press
the'"
or
~
button
to
select On or Off.
3.
Press the EXIT button
to
exit.
rtJ
If your
receiver
supports audio
only,
it
may not appear
in
the
device
list.
rtJ
The receiver will work when you
have
properly connected the optical
in
jack of the
receiver
to
the
DIGITAL AUDIO OUT (OPTICAL) jack of the
TV.
I2J
When the Home Theater receiver
is
set
to
On,
you
can
hear sound output from the
TV's Optical jack. When the TV
is
displaying a OTV(air) signal, the TV will send out
5.1
channel sound
to
the Home theater receiver. When the source
is
a digital component such as a
OVO
and
is
connected
to
the TV via HOMI, only 2 channel sound will
be
heard from the Home Theater receiver.
rtJ
If there
is
a power interruption
to
the TV when the Receiver
is
set
to
On (by disconnecting the power cord or a power
failure), the Speaker Select may
be
set
to
External Speaker when you turn the TV
on
again.
To Next Page
Loading...
