English - 30
Listening to the Sound of the Sub (PIP) Picture
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER
button.
2. Press the ▲ or ▼ button to select “Sound Select”, then press the ENTER button.
3. Press the ▲ or ▼ button to select “Main” or “Sub”, then press the ENTER
button.
Press the EXIT button to exit.
• Main: Used to listen to the sound of the main picture.
• Sub: Used to listen to the sound of the sub picture.
You can select this option when “PIP” is set to “On”. (See page 25)
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
You can connect a set of headphones to your set if you wish to watch a TV program without disturbing other people in the room.
Connecting Headphones (Sold separately)
When you insert the headphone’s plug into the headphone jack, you can operate
“MTS” (in TV mode), “Auto Volume” and “Sound Select” (in PIP mode) in Sound
menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not hear sound from the speakers when you connect headphones to the TV.
The headphone volume and TV volume are adjusted separately.
TV Side Panel
Move Enter Return
Mode : Custom ►
Equalizer ►
SRS TS XT : Off ►
MTS : Stereo ►
Auto Volume : Off ►
TV Speaker : On ►
Sound Select : Main ►
SoundTV
Move Enter Return
Mode : Custom
Equalizer
SRS TS XT : Off
MTS : Stereo
Auto Volume : Off
TV Speaker : On
Sound Select : Main
SoundTV
Mian
Sub
To Next Page
Loading...
