10-2 Connection Panel
10 Operating Instructions and Installation
10-2
1. AV IN 1, 2
Video and audio inputs for external devices, such as
a camcorder or VCR.
S-VIDEO
Connect an S-Video signal from a camcorder or VCR.
2. AUDIO OUT (R/L)
Connect to the audio input jacks on your Amplifier/
Home theater.
3. HDMI / DVI IN / DVI IN (AUDIO R/L)
Connect to the HDMI jack of a device with an HDMI
output. Use the HDMI/DVI IN terminal for DVI
connection to an external device. You should use the
DVI to HDMI cable or DVI-HDMI adapter (DVI to
HDMI) for video connection, and the DVI IN
'R-AUDIO-L' terminal for audio.
- HDMI / DVI IN terminal does not support PC.
- No sound connection is needed for an HDMI to
HDMI connection
4. ANT IN
Connect to an antenna or cable TV system.
5. Headphone
Connect a set of external headphones for private
listening.
6. PC IN
Connect to the video and audio output jacks on
your PC.
7. SERVICE
Connector for service only.
8. COMPONENT IN 1, 2
Connect Component video/audio.
9. POWER INPUT
Connect the supplied power cord.
10. KENSINGTON LOCK
The Kensington lock (optional) is a device used to
physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
- The place of the Kensington Lock may be different
depending on its model.
To Next Page
Loading...
