3 Alignments and Adjustments
3-12
3-5 Software Upgrade
3-5-1 How to Update Flash ROM (with RS-232C Cable)
1. Installthe Flash Downloader
ConnectSet(Service Jack)and Jig Cable to execute Program Update.
2. Turn on the Set (or on Stand by mode)
- Run "MTKtool"
3. Turn off (= AC Power off) the Set (waiting a few seconds) and turn on again.
- Click Reset
- Choose MT8202 (1)
- Select Com Port (2) (Auto Detect)
- Select Bin file, by browse (3)
- Click Upgrade button (4)
To Next Page
Loading...
