Adjusting the TV On/Off Melody Sound
A melody sound can be set to come on when the TV is powered On or Off.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2.
Press the ▲ or ▼ button to select “External Settings”, then press the
ENTER button.
3.
Press the ▲ or ▼ button to select “Melody”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”, then
press the ENTER
button.
Off: Turns off the melody function.
Low: Sets the melody volume to low.
Medium: Sets the melody volume to medium.
High: Sets the melody volume to high.
•
•
•
•
Press the EXIT button to exit.
The Melody does not play
-
When no sound is output from the TV because the MUTE button has been
pressed.
-
When no sound is output from the TV because the volume has been
reduced to minimum with the VOL – button.
- When the
TV is turned off by Sleep Timer function.
➣
Setting the Light Effect
You can turn the LED on the front of TV on/off.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2.
Press the ▲ or ▼ button to select “External Settings” then press the
ENTER button.
3.
Press the ▲ or ▼ button to select “Light Effect”, then press the
ENTER button.
Press the ▲ or ▼ button to select “Off”, “In Standby”, “Watching TV” or
“Always”, then press the ENTER button.
Off: LED will not come on.
In Standby: Turns the LED on in standby mode.
Watching TV: Turns the LED on while watching TV.
Always: LED will come on after you turn the TV off.
•
•
•
•
Press the EXIT button to exit.
Set the “Light Effect” to “Off” to reduce power consumption.
➣
Setup
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
Software Upgrade
Setup
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
Software Upgrade
To Next Page
Loading...
