◀ ▶ ◀
English
❑
Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work.
•
Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
•
Only one receiver (home theater) can be connected.
•
Check if the Anynet+ device power cord is properly connected.
•
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
•
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
•
Check whether the TV remote control is in TV mode.
•
Check whether the remote control is Anynet+ compatible.
•
Anynet+ doesn’t work in certain situations. (Searching channels,
operating My Contents or Plug & Play (initial setup), etc.)
•
When connecting or removing the HDMI cable, please make sure to
search devices again or turn your TV off and on again.
•
Check if the Anynet+ Function of Anynet+ device is set on.
To Next Page
Loading...
