To Next Page
D
Danielle MurrayAug 6, 2025
Why won't my Anynet+ device play on my Samsung LT23A350 Monitor?
- MMichael GarrettAug 6, 2025
The play function cannot be used on your Samsung Monitor when Plug & Play (initial setup) is in progress.
Why won't my Anynet+ device play on my Samsung LT23A350 Monitor?
The play function cannot be used on your Samsung Monitor when Plug & Play (initial setup) is in progress.
How to fix Anynet+ not working on my Samsung Monitor?
If Anynet+ is not working on your Samsung Monitor, first ensure the device you are trying to connect is an Anynet+ compatible device, as the system only supports these devices. Check that only one receiver (home theatre) is connected. Verify the Anynet+ device's power cord, Video/Audio/HDMI cable connections are properly connected. Also, make sure Anynet+ (HDMI-CEC) is turned On in the System menu and that the TV remote control is in TV mode and is Anynet+ compatible. Note that Anynet+ may not function during certain operations like searching channels, using My Downloads, or during Plug & Play (initial setup). If you connect or disconnect the HDMI cable, search for devices again or power cycle your TV. Finally, ensure the Anynet+ Function of the Anynet+ device is enabled.
Why is the connected device not displayed on my Samsung LT23A350?
If your Samsung Monitor doesn't display a connected device, verify that the device supports Anynet+ functions. Also, ensure the HDMI cable is properly connected and that Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Note that only HDMI cables can be used to connect Anynet+ devices, but some HDMI cables may not support Anynet+ functions. If the connection was interrupted due to a disconnected HDMI cable, power cord, or power failure, repeat the device scan.
How to start Anynet+ on Samsung LT23A350 Monitor?
To start Anynet+ on your Samsung Monitor, ensure the Anynet+ device is correctly connected to the TV and that Anynet+ (HDMI-CEC) is set to On in the System menu. Then, press the TOOLS button to bring up the Anynet+ menu and choose the desired option.
How to exit Anynet+ on Samsung Monitor?
To exit Anynet+ on your Samsung Monitor, select View TV in the Anynet+ menu. Alternatively, press the SOURCE button on the TV remote and select a device other than an Anynet+ device. You can also press < CH >, CH LIST, PRE-CH, and FAV.CH to switch to TV mode.
What to do if the message 'Connecting to Anynet+ device...' appears on the Samsung Monitor?
If the message "Connecting to Anynet+ device..." appears on your Samsung Monitor, you won't be able to use the remote control while Anynet+ is configuring or switching view modes. Wait until the Anynet+ setting or view mode switch is complete before using the remote.
Guide to navigating and using the channel selection interface.
Scans for channels automatically and stores them in memory.
Apply preset picture adjustments for different viewing environments.
Optimize screen quality based on viewing position and contrast.
Adjust aspect ratio and picture size for optimal display.
Fine-tune picture parameters like contrast, gamma, and color.
Connect and configure the TV for use as a computer display.
Select sound profiles for different content types like music or movies.
Set the TV clock manually or automatically for timer functions.
Control access to channels and programs using PIN and rating locks.
Manage power consumption through various energy-saving settings.
Control connected Samsung devices with the TV remote.
Enable Anynet+ functionality for device control via HDMI.
Solutions for common Anynet+ connection and operation problems.
Enjoy media files like photos, music, and videos saved on USB devices.
Browse and select media files for playback from USB or PC.
Instructions on how to play video files from connected storage.
Instructions on how to play music files from connected storage.
View photos individually or as a slideshow from connected storage.
General