◀ ▶ ◀
English
■
Auto Program
Scans for channels automatically and stores them in the TV’s memory.
To start Auto Program, follow these steps:
1. Push MENU
m
→
Channel
→
ENTER
E
on your remote.
2. Select Auto Program, and then press ENTER
E
.
3. Select Air or Cable or both by highlighting and then pressing ENTER
E
.
N
If you selected Air or Cable or both on the Antenna screen, your choice will
already be selected.
4. Select Search or Next, and then press ENTER
E
.
5. If you selected Cable, the Cable System screen appears. Select Digital Cable
System, and then press ENTER
E
.
N
If you selected Air only, Auto Program starts.
To Next Page
Loading...
