▶ ◀ ▶
English
6. Select STD, HRC, or IRC, and then press ENTER
E
.
7. Repeat for Analog.
8. Select Search or Next, and then press ENTER
E
. Auto Program starts.
N
After all the available channels are stored, Auto Program removes scrambled
channels. When done, the Auto Program menu then reappears. This process
can take up to 30 minutes
How to Stop Auto Programming
1. Press the ENTER
E
button.
2. A message will ask Stop Auto Program? Select Yes by pressing the
l
or
r
button.
3. Press the ENTER
E
button.
To Next Page
Loading...
