System setup
217
3. Useful Setting Menus
8
Sound / Volume
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
• Press (Menu) > System Setup > Sound/Volume on the control panel.
Item Description
Key Sound
Turns the key sound on or off. With this option set to on,
a tone sounds each time a key is pressed.
Alarm Sound
Turns the alarm sound on or off. With this option set to
on, an alarm tone sounds when an error occurs or fax
communication ends.
Speaker
Turns on or off the sounds from the telephone line
through the speaker, such as a dial tone or a fax tone.
With this option set to Comm. which means the speaker
is on until the remote machine answers.
You can adjust the volume level using (On
Hook Dial). You can adjust the speaker volume
only when the telephone line is connected.
a Press (fax) on the control panel.
b Press (On Hook Dial). A dial tone sounds
from the speaker.
c Press the arrows until you hear the volume you
want.
d Press (On Hook Dial) to save the change
and return to ready mode.
Ringer
Adjusts the ringer volume. For the ringer volume, you can
select off, low, middle, and high level.
Item Description
To Next Page
Loading...
