13
Installation settings
• The menu of settings on installation is only for a certified installer.
CAUTION
1. Network & Tracking
Touch Centralized Controller explores installation information and status information of the devices which form the
system for 10 minutes. To use this function, you need user authentication.
In addition, you can select Show / Hide(
) for the device that has completed the tracking. You can also hide the device
which is found during the tracking with the Hide function.
• When performing the tracking for the first time, all devices will be included in one zone.
• The zone information edited by a user will be maintained even if you perform the tracking.
CAUTION
2. Data backup & restoration
Save all user information of a Touch Centralized Controller to a SD card and restore the information from this data.
For the data restoration, you need user authentication.
• When using the function of the data backup or data restoration, you need to insert the SD card to the Touch
Centralized Controller.
CAUTION
3. Device settings
You can allow the control of a On/Off controller with a remote controller from Touch Centralized Controller and can
change the communication address of the Touch Centralized Controller.
4. System Initialization
You can delete all user information of Touch Centralized Controller. To use this function, you need user authentication.
Device Information
1. Version information: The version information of the Touch Centralized Controller is displayed.
2. For the information of open source, refer to [Setting]-[Device Information].
Touch-con_IB_03944A_2_EN.indd 13 2013-10-07 오후 2:11:31
To Next Page
Loading...
