28
Installing a Universal Comm. Kit
Example of IN/OUT sensor installation 1
1. Chcek the sensor and sensor holder you will attach.
Insulator
Sensor holder
IN/OUT sensor
Type
Diameter of a
sensor (in(mm))
Diameter of a
sensor holder
(in(mm))
OUT sensor
NOTE
2. Brazing the sensor holder to the selected location of a pipe.
Sensor holder
Pipe
Brazing a sensor
•
•
the surface of the pipe.
• Check whether the sensor you will attach is IN or
•
sensor holder length.
NOTE
3. Insert the sensor and the clip into the sensor holder.
IN/OUT sensor
Clip for sensor
4. Bend the clip to x it.
5. Attach the insulator around the attached sensor.
Insulator
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 28DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 28 2023-01-13 오전 11:35:132023-01-13 오전 11:35:13
To Next Page
Loading...
