147
System
8
8 System
8.11.8 Power On Adjustment
You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50
seconds)
A warm-up time that is too short may damage the product due to overvoltage.
8.11.9 Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that
is acceptable.
The default temperature is set to 77 C.
The recommended operating temperature for this product is 75 to 80 C (based on an ambient
temperature of 40 C).
The screen will become darker if the current temperature exceeds the specified temperature limit. If the
temperature continues to rise, the product will power off to prevent overheating.
8.11.10 Device Name
Selet or enter a Device Name. This name can be shown on network remote controls over the network.
To Next Page
Loading...
