44
Preparations
1
1 Preparations
Input source control
Function
The input source of a product can be changed using a PC.
Viewing input source state (Get Input Source Status)
Setting the input source (Set Input Source)
"Input Source": An input source code to be set on a product.
DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only
respond to "Get" commands.
This model does not support BNC, S-Video, HDMI2 and HDMI2_PC, DisplayPort.
MagicInfo is only available with models that contain the MagicInfo function.
RF (TV) and DTV are only available with models that include a TV.
Header Command
ID
Data length
Checksum
0xAA 0x14 0
Header Command
ID
Data length Data
Checksum
0xAA 0x14 1
"Input
Source"
0x14 PC
0x1E BNC
0x18 DVI
0x0C Input source
0x04 S-video
0x08 Component
0x20 MagicInfo
0x1F DVI_video
0x30 RF (TV)
0x40 DTV
0x21 HDMI1
0x22 HDMI1_PC
0x23 HDMI2
0x24 HDMI2_PC
0x25 Display Port
To Next Page
Loading...
