Samsung MD40B - Page 49

49
Preparations
1
1 Preparations
Auto adjustment control (PC and BNC only)
 Function
Automatically adjust the PC system screen using a PC.
 Viewing auto adjustment state (Get Auto Adjustment Status)
 None
 Setting auto adjustment (Set Auto Adjustment)
"Auto Adjustment" : 0x00 (at all times)
 Ack
 Nak
"ERR" : A code showing what error has occurred.
Header Command
ID
Data length Data
Checksum
0xAA 0x3D 1
"Auto
Adjustment"
Header
Comma
nd
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘A’ 0x3D
"Auto
Adjustment"
Header
Comma
nd
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘N’ 0x3D "ERR"