63
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
7 Double-check the settings you have just configured.
If the execution icon does not appear, double-click the MagicInfo icon on the desktop. The icon
will appear at the bottom right of the screen.
For further details on how to use MagicInfo, refer to the MagicInfo Lite Edition software CD
provided with the network box.
MagicInfo Setup Wizard - v.1.12
Setup Information
1. Application : MagicInfo Pro [LAN,WAN based version\
2. Internet Protocol [TCP/IP]
IP : 192.168.0.102
3. Language : English
4. Screen Type : Landscape
Do not show again
< Back(B) Apply Finish Cancel
To Next Page
Loading...
