4.5
P
RINT MEDIA
Selecting the Output Tray
1
Open the rear door
by pulling it down
.
The cover functions as the output tray.
To open the rear output tray:
2
Pull the extender to extend the output
tray to its full-length position.
This will allow the tray to hold longer
paper.
3
If you do not want to stack the printed
pages on the rear output tray, slide the
extender back into place and close the
tray. The pages will then stack on the
top output tray.
Note: The capacity of the rear output tray is
the same as that of the Multi-Purpose Tray. If
the tray is overloaded with printed pages, it
may fall from the printer. Remove the pages
so that the tray is not overloaded.
To Next Page
Loading...
