Model Yield OEM Part # Secondary # Chip? Typical Aftermarket
Toner Weight
Samsung ML2250, 2250M,
2251, 2251N, 2251NP, 2252,
2252W, 2255G 5000 ML-2250D5/XAA ML-2250D5/XAA N 120
Samsung SCX-4520, 4720,
4720F 3000 SXC4720D3/XAA SXC4720D3/XAA Y 75
5000 SXC4720D5/XAA SXC4720D5/XAA Y 120
Dell 1600n 3000 310-5416 KR-OK4671 Y 75
5000 310-5417 KR-OK4210 Y 120
Xerox Phaser 3150 3500 109R00746 ML2250D4/P31540 Y 75
5000 109R00747 ML2250D5/P31541 Y 120
Xerox WorkCentre
PE120/PE120i 3500 109R00601 SXC4720D4/PE120 Y 75
5000 109R00606 SXC4720D5/PE121 Y 120
REQUIRED TOOLS
•
Toner approved vacuum
• A small common screw driver
• A Phillips head screwdriver
• Needle nose pliers
REQUIRED SUPPLIES
•
Samsung 2250 Toner either 75g or 120g depending on yield
• Conductive Grease
• Drum lubricating powder
SAMSUNG ML 2250 • CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
The standard cartridge (Samsung part# ML-2250D5/XAA) comes new with 120g toner, and is rated for
5,000 pages at 5% coverage. Other brands based on the 2250 have a low yield cartridge rated for 3,000
pages. They are also listed in the chart below. In some cases, the cartridges do not have the branded part
number on them. For those cases, we have listed the part numbers that are on the cartridge label (Samsung
manufacturing code):
To Next Page
Loading...
